Truepoint Laser Scanning

Case Study: 3D Laser Scanning Denver, Colorado Technology Center

Intensity Map Point Cloud capturing columns, beams, piping, and conduit

Location:
Denver, Colorado

Task:

The client needed to create as-builts and needed accurate room dimensions, beam and column detail, elevations, and dimensions on all mechanical piping and conduit.

Challenge:
Traditional methods of measurement would have been time-consuming, less accurate, and disruptive to the active construction site.  With the need to acquire 3D information on overhead piping and structural steel, it is much safer, easier and more complete to capture all of this information using laser scanning            

Solutions:

By utilizing 3D Laser Scanning, the entire area was scanned within two days. There were no shut-downs or restrictions to the construction or site operations. We were also able to tie the interior data to survey control established on the exterior of the building.


Deliverables:
Deliverables included a raw intensity map point cloud to the client.

Added Value:
Only 3D Laser Scanning is capable of capturing as much data in such a small period of time.  Because of the speed of laser scanning, TruePoint Scanning was able to document all of this information even while work was already underway, with no interruptions. The Denver client could then make fast and exact changes to the installation, avoiding errors and loss of time.

If you are in need of as-built documentation, existing condition drawings, or a 3D Model of an intricate space, TruePoint Scanning provides an extremely fast, accurate and efficient way to gather the necessary field data.  For project inquiries in Colorado and surrounding states, contact Dave Schaff at 720-618-1029 or denver@truepointscanning.com.

 

Click here to view more case studies.

 

 

Site Last Updated June 26, 2017
Case studies
Request a quote
Contact Us
Video Gallery

Whitepaper

USIBD Member

 

Home Applications Case Studies Contact Us Locations  
About Overview Featured Request a Quote Colorado Nevada
Equipment 3D Gaming & Software View All Request a Presentation Connecticut New Jersey
Software Architectural Documentation   Phone/Email Florida New York
Deliverables As-Built Verification Galleries Directory Georgia Ohio
Career Opportunities BIM Modeling Photo Gallery Equipment for Sale Illinois Oklahoma
In the News Construction Video Gallery Newsletter Sign Up Indiana Pennsylvania
Quarterly Newsletter Drone Services   Insurance Form & W-9 Kentucky Rhode Island
Laser Scanning Misconceptions Engineering Professionals   White Paper PDF Massachusetts Texas
Frequently Asked Questions Ground Penetrating Radar     Michigan Utah
Site Map Historical Documentation     Minnesota Washington DC
  Oil & Gas     Missouri Wisconsin
  Overhead Clearances        
  Power, Process & Plant        
  Telecommunications        
  Water / Wastewater Treatment Plants        

 

PEC Safety, ISN, Browz

 

©2017 TruePoint Laser Scanning, LLC. TruePoint Laser Scanning, LLC. ® is a Registered Trademark
*DISCLAIMER: 3D Laser scanning is a measurement tool to assist in capturing as-built conditions of existing spaces and should be used in conjunction with other sound industry practices for verifying these conditions, including but not limited to: site visits, manual field measurements and verifications of scan data, to ensure its accuracy prior to design and engineering. Because this data can be used for various applications and disciplines outside the scope of the original field scanning and beyond our control, we cannot guarantee that the data is accurate for these uses.
Privacy Statement

 

Nationwide Service Truepoint Scanning Linkedin Truepint Scanning Facebook